White Yukon Tool Box
Our White Yukon Tool Box combines professional-grade durability with a clean, high-visibility finish that stands out on any job site or in your garage. Built from heavy-gauge steel and sealed with weather-resistant powder coating, this storage solution protects your tools from the elements while offering secure organization for everything from hand tools to power equipment.
We designed this white tool box with contractors, mechanics, and serious DIYers in mind. The reinforced lid supports up to 300 pounds, converting your storage into a sturdy work surface. Gas-assist struts ensure smooth, controlled opening even when fully loaded, while the three-point locking system keeps your investment secure.
Construction & storage specs
Powder Coat Finish & Steel Construction
The white yukon tool box features a professional-grade powder coat finish applied over 16-gauge steel panels. This thermally bonded coating resists chips, scratches, and UV fading far better than traditional wet paint, maintaining its clean appearance through years of outdoor exposure.
Our steel construction includes fully welded corners and reinforced mounting flanges that distribute load evenly across the installation surface. The same engineering standards we apply to our 46-inch professional series carry through to every white model we manufacture.
Interior Storage & Organization
The main compartment offers 4.2 cubic feet of secure storage space with clear sight lines to every corner. We include a full-width removable tray with six adjustable dividers, letting you customize compartment sizes for drill bits, sockets, measuring tools, and fasteners.
Below the tray, the deep lower compartment accommodates power tools, pneumatic equipment, and bulk supplies without forcing you to stack items precariously. Smooth interior surfaces with rolled edges prevent snagging on gloves or tool bags during retrieval.
Installation & Mounting Options
Pre-drilled mounting holes along the base flange accept standard 3/8-inch hardware for permanent installation in truck beds, trailers, or shop floors. We space holes at 12-inch intervals to align with most vehicle bed rail systems and trailer crossmembers.
The flat-bottom design sits flush on any level surface, eliminating gaps that collect debris or allow water intrusion. Integrated tie-down loops at each corner accept cargo straps rated up to 1,500 pounds, securing the white yukon tool box during transport without drilling additional holes.
More Heavy-Duty Tool Storage Solutions
Rated 4.8 by verified buyers
White Yukon Tool Box Questions
The white yukon tool box measures 36 inches wide, 18 inches deep, and 16 inches high including the lid. The mounting flange adds 1.5 inches to the width and depth for securing to truck beds or trailers.
Interior usable space is 34 inches wide by 16 inches deep by 13 inches high, providing 4.2 cubic feet of total storage capacity. The removable tray measures 34 inches wide by 16 inches deep by 3 inches high.
Yes, the 36-inch width fits crosswise in most short-bed trucks with 5-foot to 6.5-foot beds. The tool box installs behind the cab or near the tailgate depending on your preferred configuration.
Pre-drilled mounting holes align with standard truck bed rail spacing. We recommend measuring your specific bed width between the wheel wells before installation to confirm clearance, as some trucks with aftermarket wheel well liners may have reduced interior width.
Clean the surface regularly with automotive car wash soap and water using a soft cloth or sponge. For stubborn grease or oil stains, use a mild degreaser followed by thorough rinsing.
Avoid abrasive cleaners, steel wool, or pressure washers set above 1,500 PSI, as these can damage the powder coat. If minor scratches occur, touch-up paint is available from our parts department matched to the exact white finish. Apply automotive paste wax twice yearly to enhance UV protection and keep the surface looking new.
The white yukon tool box includes a keyed cylinder lock as standard, but the latch mechanism accepts standard padlock hasps up to 3/8-inch shackle diameter. Many customers install our heavy-duty lock hasp upgrade for use with disc locks or combination padlocks.
The three-point locking rods still engage when using an external padlock, maintaining the same security level. We recommend stainless steel or brass padlocks for outdoor use to prevent rust from affecting lock operation.
The white yukon tool box features weather-resistant seals that keep out rain, snow, and road spray during normal use. The continuous rubber gasket creates a dust-tight seal that prevents water intrusion under typical weather conditions.
While highly water-resistant, the box is not designed for submersion or pressure washing with the nozzle directly on the seal. Integrated drainage channels along the bottom edge allow any condensation or minor seepage to exit without accumulating inside. For maximum protection, we recommend storing sensitive electronics in secondary waterproof cases.
Each white yukon tool box ships complete with the main storage unit, reinforced lid with pre-installed gas struts, removable tray organizer with six adjustable dividers, two keys for the cylinder lock, and mounting hardware instructions.
Mounting bolts are sold separately to accommodate different installation surfaces (truck beds, trailers, workshop floors), as hardware requirements vary by application. The limited lifetime warranty card and care instructions are included in the packaging.
The white yukon tool box works equally well for permanent installation on garage floors, workbenches, or shelving as it does for truck bed mounting. The flat-bottom design sits stable on any level surface without modification.
For permanent garage installation, we recommend anchoring through the pre-drilled mounting holes into concrete floors using 3/8-inch expansion anchors (not included). The integrated tie-down points allow you to secure the box to shelving or workbench tops without drilling additional holes through the base.